Enter or capture postures
This section presents the tools available for entering, capturing, or importing postures in Ergoniza Intelligent.
The model’s posture can be obtained in several ways: by applying artificial intelligence to images or videos, using a real-time camera, importing external motion-capture data, or manipulating the model manually. The appropriate procedure depends on the operating mode, the available material, and the required level of detail.
Available tools
AI image capture: obtains a posture from a still image.
AI video capture: detects a posture sequence from a video file. It is intended for Multiple postures mode.
Real-time camera capture: makes the model adopt postures detected in real time using a camera connected to the computer.
Import capture: imports posture sequences from external motion-capture systems, such as Xsens MVNX files.
Manual model-posture manipulation: positions or corrects the model manually with the posture-editing controls.
Reviewing captured postures
Review postures obtained through automatic procedures before using them in an assessment. Confirm that the limbs, joints, and supports were detected correctly and that the posture accurately represents the actual task.
If a detected posture is incorrect, use Manual model-posture manipulation to correct it.
Related sections
To configure Fast AI detection parameters, see Intelligent options.
When working with a time-based posture sequence, also see Timeline.