16 BIBLIOGRAFÍA

(NIOSH), National Institute for Occupational Safety and Health. “Work Practices Guide for Manual Lifting -DHHS (NIOSH) Publication No. 81-122.” National Institute for Occupational Safety and Health (NIOSH), 1981.

AAOS. Joint Motion: Method of Measuring and Recording. Chicago, 1965.

ACGIH. “Ergonomic Threshold Limit Value (TLV) for Hand Activity Level (HAL) and Muscle Fatigue.” In 2016 TLVs and BEIs, ERG-1–ERG-14. Cincinnati, OH: ACGIH, 2016.

Adams, M. A., and W. C. Hutton. “The Mechanical Function of the Lumbar Apophyseal Joints.” Spine 8, no. 3 (1983): 327–30. doi:10.1097/00007632-198304000-00017.

Ahrache, K. El, Da. Imbeau, and B. Farbos. “Percentile Values for Determining Maximum Endurance Times for Static Muscular Work.” International Journal of Industrial Ergonomics 36, no. 2 (2006): 99–108. doi:10.1016/j.ergon.2005.08.003.

Allbrook, D. “Movements of the Lumbar Spinal Column.” The Journal of Bone and Joint Surgery. British Volume, 1957. doi:10.1302/0301-620x.39b2.339.

Anderson, C. K., D. B. Chaffin, and G. D. Herrin. “A Study of Lumbosacral Orientation under Varied Static Loads.” Spine 11, no. 5 (1986): 456–62. doi:10.1097/00007632-198606000-00012.

Anderson, C K., D B. Chaffin, G D. Herrin, and L. S. Matthews. “A Biomechanical Model of the Lumbosacral Joint during Lifting Activities.” Journal of Biomechanics 18, no. 8 (1985): 571–84. doi:10.1016/0021-9290(85)90012-0.

AOKI, Kei, and Nobutoshi YAMAZAKI. “The Role of Joint Resistance by Passive Tissues in Human Bipedal Walking.” Biomechanisms 14 (1998): 59–68. doi:10.3951/biomechanisms.14.59.

Apostolico, Alessandro, Nicola Cappetti, Carmine D’Oria, Alessandro Naddeo, and Marco Sestri. “Postural Comfort Evaluation: Experimental Identification of Range of Rest Posture for Human Articular Joints.” International Journal on Interactive Design and Manufacturing 8 (2014): 109–20. doi:10.1007/s12008-013-0186-z.

Bean, James C., Don B. Chaffin, and Albert B. Schultz. “Biomechanical Model Calculation of Muscle Contraction Forces: A Double Linear Programming Method.” Journal of Biomechanics 21, no. 1 (1988): 59–66. doi:10.1016/0021-9290(88)90192-3.

Boone, D. C., and S. P. Azen. “Normal Range of Motion of Joints in Male Subjects.” Journal of Bone and Joint Surgery - Series A 61, no. 5 (1979): 756–59. doi:10.2106/00004623-197961050-00017.

Brinckmann, P., M. Biggemann, and D. Hilweg. “Fatigue Fracture of Human Lumbar Vertebrae.” Clinical Biomechanics, 1988. doi:10.1016/S0268-0033(88)80001-9.

Chaffin, D. B., M. S. Redfern, M. Erig, and S. A. Goldstein. “Lumbar Muscle Size and Locations from CT Scans of 96 Women of Age 40 to 63 Years.” Clinical Biomechanics 5, no. 1 (1990): 9–16. doi:10.1016/0268-0033(90)90026-3.

Chaffin, D. B.J., G. B. J. Andersson, and B.J. Martin. Occupational Biomechanics. Fourth. Hoboken, NJ: Jhon Wiley & Sons Inc., 2006.

Chaffin, D.B. “On the Validity of Biomechanical Models of the Low-Back for Weight Lifting Anlaysis.” Amer. Soc. Mech. Eng Proc., nos. 75-WA-B10-1 (1975).

Chaffin, Don B.J., Gunnar B. Andersson, and Bernard J. Martin. Occupational Biomechanics, 4th Edition. Wiley and Sons, 2006.

Chihara, Takanori, Taiki Izumi, and Akihiko Seo. “Perceived Discomfort Functions Based on Joint Moment for Various Joint Motion Directions of the Upper Limb.” Applied Ergonomics, 2014. doi:10.1016/j.apergo.2013.04.016.

Cholewicki, Jacek, Krishna Juluru, and Stuart M. McGill. “Intra-Abdominal Pressure Mechanism for Stabilizing the Lumbar Spine.” Journal of Biomechanics 32, no. 1 (1999): 13–17. doi:10.1016/S0021-9290(98)00129-8.

Clarke, H. H. Muscular Strength and Endurance in Man. Englewood Cliffs, NJ: Prentice Hall, 1966.

Clauser, Charles E, John T McConville, and J W Young. “Weight, Volume, and Center of Mass of Segments of the Human Body.” National Technical Information Service, 1969.

Cocchiarella, L., and GBJ Andersson. Guides to the Evaluation of Permanent Impairment. 5th Ed. The Journal of Bone and Joint Surgery-American Volume. 5^a. Chicago, 2001. doi:10.2106/00004623-200109000-00050.

Contini, R., R. J. Drillis, and M. Bluestein. “Determination of Body Segment Parameters.” Human Factors: The Journal of Human Factors and Ergonomics Society 5, no. 5 (1963): 493–504. doi:10.1177/001872086300500508.

D’Amico, M., and G. Ferrigno. “Comparison between the More Recent Techniques for Smoothing and Derivative Assessment in Biomechanics.” Medical & Biological Engineering & Computing, 1992. doi:10.1007/BF02446130.

Davis, P. R., J. D. Troup, and J. H. Burnard. “Movements of the Thoracic and Lumbar Spine When Lifting: A Chrono-Cyclophotographic Study.” Journal of Anatomy 99 (1965): 13–26.

Davis, Peter R. “Posture of the Trunk during the Lifting of Weights.” British Medical Journal, 1959. doi:10.1136/bmj.1.5114.87.

Delleman, N. J., and J. Dul. “International Standards on Working Postures and Movements ISO 11226 and EN 1005-4.” Ergonomics, 2007. doi:10.1080/00140130701674430.

Dempster, W. T. Space Requirements of the Seated Operator. (Technical Report WADC-TR-55-159). Wright-Patterson Air Force Base, OH: Aerospace Medical Research Laboratory. Dayton, 1955.

Fleisig, G. S., J. S. Slowik, Ma. Daggett, M. A. Rothermich, E. L. Cain, and K. E. Wilk. “Active Range of Motion of the Shoulder: A Cross-Sectional Study of 6635 Subjects.” JSES International 7, no. 1 (2023): 132.137. doi:10.1016/j.jseint.2022.09.008.

Frey-Law, Laura A., John M. Looft, and Jesse Heitsman. “A Three-Compartment Muscle Fatigue Model Accurately Predicts Joint-Specific Maximum Endurance Times for Sustained Isometric Tasks.” Journal of Biomechanics 45 (2012): 1803–8. doi:10.1016/j.jbiomech.2012.04.018.

Frey Law, Laura A., Jennifer E. Lee, Tara R. McMullen, and Ting Xia. “Relationships between Maximum Holding Time and Ratings of Pain and Exertion Differ for Static and Dynamic Tasks.” Applied Ergonomics 42 (2010): 9–15. doi:10.1016/j.apergo.2010.03.007.

Gallagher, Sean, and William S. Marras. “Tolerance of the Lumbar Spine to Shear: A Review and Recommended Exposure Limits.” Clinical Biomechanics 27, no. 10 (2012): 973–78. doi:10.1016/j.clinbiomech.2012.08.009.

Gerling, Michael E., and Stephen H.M. Brown. “Architectural Analysis and Predicted Functional Capability of the Human Latissimus Dorsi Muscle.” Journal of Anatomy 223, no. 2 (2013): 112–22. doi:10.1111/joa.12074.

Govaerts, Renée, Bruno Tassignon, Jo Ghillebert, Ben Serrien, Sander De Bock, Toon Ampe, Ilias El Makrini, Bram Vanderborght, Romain Meeusen, and Kevin De Pauw. “Prevalence and Incidence of Work-Related Musculoskeletal Disorders in Secondary Industries of 21st Century Europe: A Systematic Review and Meta-Analysis.” BMC Musculoskeletal Disorders 22, no. 751 (2021). doi:10.1186/s12891-021-04615-9.

Greene, B. L., and S. L. Wolf. “Upper Extremity Joint Movement: Comparison of Two Measurement Devices.” Archives of Physical Medicine and Rehabilitation 70, no. 4 (1989): 288–90.

Greene, WB, and JD Heckma, eds. The Clinical Measurement of Joint Motion. Rosemont, IL: American Academy of Orthopaedic Surgeons, n.d.

Gunal, Izge, Nusret Kose, Oral Erdogan, Erol Gokturk, and Sinan Seber. “Normal Range of Motion of the Joints of the Upper Extremity in Male Subjects, with Special Reference to Side.” Journal of Bone and Joint Surgery 78, no. 9 (1996): 1401–4. doi:10.2106/00004623-199609000-00017.

Hatze, H. “The Fundamental Problem of Myoskeletal Inverse Dynamics and Its Implications.” Journal of Biomechanics 35, no. 1 (2002): 109–15. doi:10.1016/S0021-9290(01)00158-0.

Honglun, H., S. Shouqian, and P. Yunhe. “Research on Virtual Human in Ergonomic Simulation.” Computers and Industrial Engineering 53, no. 2 (2007): 350–56. doi:10.1016/j.cie.2007.06.027.

Hwang, Jaejin, and Kyung Sun Lee. “Classification of Whole-Body Postural Discomfort Using Cluster Analysis.” International Journal of Environmental Research and Public Health 17, no. 22 (2020): 8314. doi:10.3390/ijerph17228314.

Intolo, Pattariya, Stephan Milosavljevic, David G. Baxter, Allan B. Carman, Poonam Pal, and Joanne Munn. “The Effect of Age on Lumbar Range of Motion: A Systematic Review.” Manual Therapy 14, no. 6 (2009): 596–604. doi:10.1016/j.math.2009.08.006.

Iridiastadi, H., and M. A. Nussbaum. “Muscle Fatigue and Endurance during Repetitive Intermittent Static Efforts: Development of Prediction Models.” Ergonomics, 2006. doi:10.1080/00140130500475666.

Islam, Saif Ul, Alexander Glover, Robert J MacFarlane, Nisarg Mehta, and Mohammad Waseem. “The Anatomy and Biomechanics of the Elbow.” The Open Orthopaedics Journal 39, no. 2 (2008): 141–54. doi:10.2174/1874325002014010095.

Kee, D., and W. Karwowski. “Joint Angles of Isocomfort for Female Subjects Based on the Psychophysical Scaling of Static Standing Postures.” Ergonomics 15, no. 4 (2004): 427–45. doi:10.1080/00140130310001638180.

Kee, D ., and W. Karwowski. “The Boundaries for Joint Angles of Isocomfort for Sitting and Standing Males Based on Perceived Comfort of Static Joint Postures.” Ergonomics 15, no. 44 (2001): 614–48. doi:10.1080/00140130110038044.

Kee, D, and W Karwowski. “LUBA: An Assessment Technique for Postural Loading on the Upper Body Based on Joint Motion Discomfort and Maximum Holding Time.” Applied Ergonomics 32, no. 4 (August 2001): 357–66. http://www.ncbi.nlm.nih.gov/pubmed/11461037.

Klussmann, A., H. Gebhardt, M. Nübling, F. Liebers, E. Quirós Perea, W. Cordier, L. V. von Engelhardt, et al. “Individual and Occupational Risk Factors for Knee Osteoarthritis: Results of a Case-Control Study in Germany.” Arthritis Research and Therapy 12, no. 3 (2010): R88. doi:10.1186/ar3015.

Koh, Hyung Woo, Sung Hyoun Cho, and Cheol Yong Kim. “Comparison of the Effects of Hollowing and Bracing Exercises on Cross-Sectional Areas of Abdominal Muscles in Middle-Aged Women.” Journal of Physical Therapy Science 26, no. 2 (2014): 295–99. doi:10.1589/jpts.26.295.

Kromodihardjo, S., and A. Mital. “The Cost/Accuracy Approach: A Method for Selecting Filming Rate for Manual Materials Handling Activities.” Applied Ergonomics 17, no. 3 (1986): 218–20. doi:10.1016/0003-6870(86)90011-6.

Kuhlman, Kurt A. “Cervical Range of Motion in the Elderly.” Archives of Physical Medicine and Rehabilitation 74, no. 10 (1993): 1071–79. doi:10.1016/0003-9993(93)90064-H.

Kumar, S. “A Study of Spinal Motion during Lifting.” Irish Journal of Medical Science 143, no. 2 (1974): 86–95. doi:10.1007/BF03004745.

Kumar, S., Don B. Chaffin, and Mark Redfern. “Isometric and Isokinetic Back and Arm Lifting Strengths: Device and Measurement.” Journal of Biomechanics 21, no. 1 (1988): 35–44. doi:10.1016/0021-9290(88)90189-3.

Kumar, Shrawan. “Moment Arms of Spinal Musculature Determined from CT Scans.” Clinical Biomechanics 3, no. 3 (1988): 137–44. doi:10.1016/0268-0033(88)90059-9.

Lantz, C. A., J. Chen, and D. Buch. “Clinical Validity and Stability of Active and Passive Cervical Range of Motion with Regard to Total and Unilateral Uniplanar Motion.” Spine 124, no. 11 (1999): 1082–89. doi:10.1097/00007632-199906010-00007.

Law, Laura A.Frey, and Keith G. Avin. “Endurance Time Is Joint-Specific: A Modelling and Meta-Analysis Investigation.” Ergonomics 53, no. 1 (2010): 109–29. doi:10.1080/00140130903389068.

Lee, Jinwon, Jaejin Hwang, and Kyung Sun Lee. “Prediction and Comparison of Postural Discomfort Based on MLP and Quadratic Regression.” Journal of Occupational Health 63, no. 1 (2021): e12292. doi:10.1002/1348-9585.12292.

Leva, P. De. “Adjustments to Zatsiorsky-Seluyanov’s Segment Inertia Parameters.” Journal of Biomechanics 29, no. 9 (1996): 1223–30. doi:10.1016/0021-9290(95)00178-6.

Looft, John M., and Laura A. Frey-Law. “Adapting a Fatigue Model for Shoulder Flexion Fatigue: Enhancing Recovery Rate during Intermittent Rest Intervals.” Journal of Biomechanics, 2020. doi:10.1016/j.jbiomech.2020.109762.

Looft, John M., and Laura A. Frey Law. “Adapting a Fatigue Model for Shoulder Flexion Fatigue: Enhancing Recovery Rate during Intermittent Rest Intervals.” Journal of Biomechanics, 2020. doi:10.1016/j.jbiomech.2020.109762.

Looft, John M., Nicole Herkert, and Laura Frey-Law. “Modification of a Three-Compartment Muscle Fatigue Model to Predict Peak Torque Decline during Intermittent Tasks.” Journal of Biomechanics 77, no. 22 (2018): 16–25. doi:10.1016/j.jbiomech.2018.06.005.

Luca, C J De. “Myoelectrical Manifestations of Localized Muscular Fatigue in Humans.” Critical Reviews in Biomedical Engineering 11, no. 4 (1984): 251–79.

Ma, L., D. Chablat, F. Bennis, W. Zhang, B. Hu, and F. Guillaume. “A Novel Approach for Determining Fatigue Resistances of Different Muscle Groups in Static Cases.” International Journal of Industrial Ergonomics 41, no. 1 (2011): 10–18. doi:10.1016/j.ergon.2010.11.005.

Ma, Liang, Damien Chablat, Fouad Bennis, and Wei Zhang. “A New Simple Dynamic Muscle Fatigue Model and Its Validation.” International Journal of Industrial Ergonomics 39 (2009): 211–20. doi:10.1016/j.ergon.2008.04.004.

Makhsous, Mohsen, Fang Lin, Ronald W. Hendrix, Matthew Hepler, and Li Qun Zhang. “Sitting with Adjustable Ischial and Back Supports: Biomechanical Changes.” Spine 28, no. 11 (2003): 1121–22. doi:10.1097/01.BRS.0000068243.63203.A8.

Marras, William S., Kermit G. Davis, and Michael Jorgensen. “Gender Influences on Spine Loads during Complex Lifting.” The Spine Journal : Official Journal of the North American Spine Society 3, no. 2 (2003): 93–99. doi:10.1016/S1529-9430(02)00570-3.

Marras, William S., Kermit G. Davis, and Michael Jorgersen. “Spine Loading as a Function of Gender.” Spine 27, no. 22 (2002): 2514–20. doi:10.1097/00007632-200211150-00017.

McGill, S. Low Back Disorders. Evidence-Based Prevention and Rehabilitation. Champaign, Illinois: Human Kinetics, 2007.

McGill, S. M., N. Patt, and R. W. Norman. “Measurement of the Trunk Musculature of Active Males Using CT Scan Radiography: Implications for Force and Moment Generating Capacity about the L4 L5 Joint.” Journal of Biomechanics 21, no. 4 (1988): 329–41. doi:10.1016/0021-9290(88)90262-X.

Morris, J. M., D. B. Lucas, and B. Bresler. “Role of the Trunk in Stability of the Spine.” The Journal of Bone & Joint Surgery 43A (1961): 327–51. doi:10.2106/00004623-196143030-00001.

National Institute for Occupational Safety and Health, NIOSH. Work Practices Guide for Manual Lifting, 1981.

Németh, Gunnar, and Hans Ohlsén. “Moment Arm Lengths of Trunk Muscles to the Lumbosacral Joint Obtained in Vivo with Computed Tomography.” Spine 11, no. 2 (1986): 158–60. doi:10.1097/00007632-198603000-00011.

NIOSH. “Applications Manual for the Revised NIOSH Lifting Equation.” DHHS (NIOSH) Publication No. 94-110, 2021. doi:10.26616/NIOSHPUB94110revised092021.

Norkin, C. & White, D., C. Norkin, and D. White. Measurement of Joint Motion: A Guide to Goniometry. Physiotherapy Canada. 5^a. Philadelphia: F. A. Davis Company, 2016.

Ogutu, Jack, and Woojin Park. “The Relationship between Perceived Discomfort of Static Posture Holding and Posture Holding Time.” Work 52, no. 1 (2015): 19–30. doi:10.3233/WOR-141946.

Oliveira Medeiros, Hugo Baptista De, Denise Sardinha Mendes Soares De Araújo, and Claudio Gil Soares De Araújo. “Age-Related Mobility Loss Is Joint-Specific: An Analysis from 6,000 Flexitest Results.” Age 35, no. 6 (2013): 2399–2407. doi:10.1007/s11357-013-9525-z.

Reid, J. G., and P. A. Costigan. “Geometry of Adult Rectus Abdominis and Erector Spinae Muscles.” Journal of Orthopaedic and Sports Physical Therapy, 1985. doi:10.2519/jospt.1985.6.5.278.

Reid, J. Gavin, P. A. Costigan, and W. Comrie. “Prediction of Trunk Muscle Areas and Moment Arms by Use of Anthropometric Measures.” Spine 12, no. 3 (1987): 273–75. doi:10.1097/00007632-198704000-00015.

Roach, K. E., and T. P. Miles. “Normal Hip and Knee Active Range of Motion: The Relationship to Age.” Physical Therapy 71, no. 9 (1991): 656–65. doi:10.1093/ptj/71.9.656.

Robertson, D. G. E., Gr. E. Caldwell, J. Hamill, G. Kamen, and S. N. Whittlesey. Research Methods in Biomechanics. 2nd Ed. Human Kinetics Publishers, 2014. doi:10.5040/9781492595809.

Rochmat, Moehamad Adi, Sarifuddin Madenda, Tri Handhika, and Ernastuti Ernastuti. “Modifying the Revised NIOSH Lifting Equation Using Anthropometric Variables to Calculate Horizontal and Vertical Multipliers.” In 2022 4th International Conference on Cybernetics and Intelligent System, ICORIS 2022, 1–8, 2022. doi:10.1109/ICORIS56080.2022.10031509.

Rohmert, W. “Ermittlung von Erholungspausen F¨ur Statische Arbeit Des Menschen.” European Journal of Applied Physiology 18, no. 2 (1960): 123–164.

Ryu, Jaiyoung, William P. Cooney, Linda J. Askew, Kai Nan An, and Edmund Y.S. Chao. “Functional Ranges of Motion of the Wrist Joint.” Journal of Hand Surgery 16, no. 3 (1991): 409–19. doi:10.1016/0363-5023(91)90006-W.

Schanne, F. “A Three-Dimensional Hand Force Capability Model for the Seated Operator.” University of Michigan, 1972.

Schultz, A., G. Andersson, and R. Ortengren. “Loads on the Lumbar Spine. Validation of a Biomechanical Analysis by Measurements of Intradiscal Pressures and Myoelectric Signals.” Journal of Bone and Joint Surgery - Series A 64, no. 5 (1982): 713–20. doi:10.2106/00004623-198264050-00008.

Seidler, A., U. Bolm-Audorff, N. Abolmaali, and G. Elsner. “The Role of Cumulative Physical Work Load in Symptomatic Knee Osteoarthritis - A Case-Control Study in Germany.” Journal of Occupational Medicine and Toxicology 7, no. 1 (2008): 21. doi:10.1186/1745-6673-3-14.

Sonne, Michael W., and Jim R. Potvin. “A Modified Version of the Three-Compartment Model to Predict Fatigue during Submaximal Tasks with Complex Force-Time Histories.” Ergonomics 59, no. 1 (2016): 85–98. doi:10.1080/00140139.2015.1051597.

Soucie, J. M., C. Wang, A. Forsyth, S. Funk, M. Denny, K. E. Roach, and D. Boone. “Range of Motion Measurements: Reference Values and a Database for Comparison Studies.” Haemophilia 17, no. 3 (2011): 500–507. doi:10.1111/j.1365-2516.2010.02399.x.

Stobbe, T. “The Development of a Practical Strength Training Program for Industry.” University of Michigan, 1982.

Svenningsen, S., T. Terjesen, M. Auflem, and V. Berg. “Hip Motion Related to Age and Sex.” Acta Orthopaedica Scan 60, no. 1 (1989): 97–100. doi:10.3109/17453678909150103.

Tousignant, M., C. Smeesters, A. M. Breton, É. Breton, and H. Corriveau. “Criterion Validity Study of the Cervical Range of Motion (CROM) Device for Rotational Range of Motion on Healthy Adults.” Journal of Orthopaedic and Sports Physical Therapy 36, no. 4 (2006): 242–48. doi:10.2519/jospt.2006.36.4.242.

Tully, Elizabeth A., Mohammad Reza Fotoohabadi, and Mary P. Galea. “Sagittal Spine and Lower Limb Movement during Sit-to-Stand in Healthy Young Subjects.” Gait and Posture, 2005. doi:10.1016/j.gaitpost.2004.11.007.

Vaughan, C. L. “Smoothing and Differentiation of Displacement-Time Data: An Application of Splines and Digital Filtering.” International Journal of Bio-Medical Computing 13, no. 5 (1982): 375–86. doi:10.1016/0020-7101(82)90003-4.

Waters, T R, V Putz-Anderson, and A Garg. Applications Manual for the Revised NIOSH Lifting Equation. Cincinnati, 1994.

Waters, T R, V Putz-Anderson, A Garg, and L J Fine. “Revised NIOSH Equation for the Design and Evaluation of Manual Lifting Tasks.” Ergonomics 36 (1993): 749–76. doi:10.1080/00140139308967940.

Westgaard, R. H. “Work-Related Musculoskeletal Complaints: Some Ergonomics Challenges upon the Start of a New Century.” Applied Ergonomics 31, no. 6 (2000): 569–80. doi:10.1016/S0003-6870(00)00036-3.

Xia, T., and L. A. Frey Law. “A Theoretical Approach for Modeling Peripheral Muscle Fatigue and Recovery.” Journal of Biomechanics 41, no. 14 (2008): 3046–52. doi:10.1016/j.jbiomech.2008.07.013.

Yates, J. W., J. T. Kearney, M. P. Noland, and W. M. Felts. “Recovery of Dynamic Muscular Endurance.” European Journal of Applied Physiology and Occupational Physiology 56 (1987): 662–67. doi:10.1007/BF00424807.

Youdas, J. W., J. R. Carey, and T. R. Garrett. “Reliability of Measurements of Cervical Spine Range of Motion - Comparison of Three Methods.” Physical Therapy 71, no. 2 (1991): 98–104. doi:10.1093/ptj/71.2.98.

Zwislocki, J. J., and D. A. Goodman. “Absolute Scaling of Sensory Magnitudes: A Validation.” Perception & Psychophysics 27, no. 1 (1980): 28–38. doi:10.3758/BF03204312.